| |
|
|
ORP Electrode BNC Type with 1 m. cable.
The
OE-150-16 single cylinder ORP electrode that
allows you to connect the BNC socket directly into the input terminal of
ORP meter or ORP controller or any ORP device that has a BNC input
terminal. This replaceable ORP electrode gives you the flexibility to
measure a solution in a container as far as 1 meter from the device. It
precisely determines the redox tension of the intended solution to be
measured to help you determine the status of your tanks, ponds, pools,
spas, etc.
Once your new ORP electrode probe is connected to the electrode input
terminal, calibrate it first with the calibration (buffer) solutions
before using the newly replace ORP electrode.
This can be used for general water applications such as drinking,
domestic and rain water, aquariums, plus its compatible with hand-held
meters or controllers with BNC provisions.
FEATURES :
Easy monitoring of pH accurately plus the values can be achieved within
few seconds
Provides HIGH & VERY ACCURATE MEASUREMENTS
APPROVED BY STRICT QUALITY AND SAFETY STANDARDS that ensures
reliability,
durability, long and
trouble-free life that can be transported easily
Reliable, stable, transportable and it's very simple and very
comfortable to install and use
SPECIFICATIONS :
Measuring Range: 0 to ±1999mV
Resolution: 1mV
Accuracy: ±0.1% F·S±1 digit
Cable Length: 1m long
Connection: 1m cable with BNC socket
หัววัดโออาร์พี สำหรับเครื่องวัดโออาร์พี
แบบข้อต่อชนิด BNC สายยาว 1 เมตร
|
|